01-18-2007 06:31 AM - edited 03-11-2019 02:21 AM
Our system : pix 506E, software version 6.3.
we use DSL from our ISP and only have dynamic IP address,which changes every few weeks. Currently we use a windows firewall software doing access control , which is not stable but otherwise works( we have dynamic DNS so end-user still use regular domian name ).
How can I configure Pix PAT to allow access to an Internal Linux server(ssh) and windows server(http), please help....
>>static (inside,outside) tcp Dynamic-IP 80 192.168.0.100 80 netmask 255.255.255.255
>>static (inside,outside) tcp Dynamic-IP 22 192.168.0.200 22 netmask 255.255.255.255...
Any advices and suggestions are greatly appreciated.
sean chang
Solved! Go to Solution.
01-18-2007 06:43 AM
You need use command interface
>>static (inside,outside) tcp interface 80 192.168.0.100 80 netmask 255.255.255.255
>>static (inside,outside) tcp interface 22 192.168.0.200 22 netmask 255.255.255.255
It means that your outside interface public IP (dynamic) is always forwarded to yours inside IPs
M.
hope that helps rate if it does
01-18-2007 06:43 AM
You need use command interface
>>static (inside,outside) tcp interface 80 192.168.0.100 80 netmask 255.255.255.255
>>static (inside,outside) tcp interface 22 192.168.0.200 22 netmask 255.255.255.255
It means that your outside interface public IP (dynamic) is always forwarded to yours inside IPs
M.
hope that helps rate if it does
01-18-2007 07:32 AM
Perfect. Solved my problem.
I just couldn't find this "interface" by reading documentation.
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide