Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to create VPN in PIX 535 Multicontext environment?

I have configured 2 PIX 535 firewalls in failover (Software 8.0) with multicontext configuration. There are 2 context created. It's running fine. However Crypto map and ISAKMP commands couldn't be supported on this. So it became impossible to create VPN. Pls suggest.

2 REPLIES
Silver

Re: How to create VPN in PIX 535 Multicontext environment?

That is one of the downsides of running multiple contexts. No VPN capabilities.

Don't use multiple contexts or use some other hardware like a router or fwsm.

Chad

Re: How to create VPN in PIX 535 Multicontext environment?

Hello Pankaj, currently VPNs,dynamic routing,QoS etc. are not supported in multiple context mode. You have to either use single mode or find another device to terminate the VPNs.

Or find a gun to shoot the ASA coders :).

Regards

Farrukh

219
Views
0
Helpful
2
Replies