Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to open Public IP on Inside Network

I have asa firewall 5540 configured with four ports inside,outside,intranet,dmz.Now my webserver is in inside zone and application is hosted on that and the application is accessed from internet through natted public IP.Can i access this public ip from my inside system if i have internet access.Means the problem is also in teh application it is opening on internet but not able to go on next page of the application.

1 REPLY
New Member

Re: How to open Public IP on Inside Network

we have a host A 192.168.1.2 is connected to the inside interface of the firewall and host B 10.10.10.35 is connected to the DMZ interface. We have published 10.10.10.35 as 1.1.1.1 on inside interface and our requirement is to access that server using the public ip address and private ip address.

Here is the sample configuration:

access-list abc extended permit ip host 10.10.10.35 any

access-list xyz extended permit ip host 10.10.10.35 any

static (DMZ,Inside) 10.10.10.35 access-list abc

static (DMZ,Inside) 1.1.1.1 access-list xyz

static (Inside,DMZ) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

105
Views
0
Helpful
1
Replies