Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

How to remove this entry

Hi Guys,

Can someone please tell me the command to remove this config on my ASA below? The ASA is running version 8.4.

object netowork mail

   host 10.1.1.79

object network mail

   nat (inside, outside) static 1.1.1.1

Any help will be greatly appreciated

Thanks,

Lake

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Red

How to remove this entry

Hi Lakeram,

You would first need to get into  the config mode on the ASA and then try the following commands:

object network mail

    no nat (inside, outside) static 1.1.1.1

    exit

no object network mail

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks, Varun Rao Security Team, Cisco TAC
2 REPLIES
Red

How to remove this entry

Hi Lakeram,

You would first need to get into  the config mode on the ASA and then try the following commands:

object network mail

    no nat (inside, outside) static 1.1.1.1

    exit

no object network mail

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks, Varun Rao Security Team, Cisco TAC
Community Member

How to remove this entry

Hi Varun,

It's actually this command. I am very sorry for my mistake. Please tell me the command to remove these entries?

object service FTP

service tcp source eq ftp

object network obj_1.1.1.1

host 1.1.1.1

object network obj_10.11.1.5

host 10.11.1.5

object service FTP

service tcp source eq ftp

object network obj_1.1.1.1
host 1.1.1.1
object network obj_10.11.1.5
host 10.11.1.5

Thanks,

Lake

249
Views
0
Helpful
2
Replies
CreatePlease to create content