Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

How to restore a saved running config with isakmp keys to startup config?

I only get the option to save the image file from tftp to flash.

Any ideas?

Thanks

2 REPLIES
New Member

Re: How to restore a saved running config with isakmp keys to st

Running 6.3(5) by the way.

New Member

Re: How to restore a saved running config with isakmp keys to st

OK - After reviewing some of the Q/A here, I figure the best way to do this is a manual approach with a little hack to make things click.

----------------

i.e. Save the config from PIX using a wr net tftp command.

Next Open in Word.

Save as another filename.

Now I can see my isakmp keys and now I CAN copy and paste the config.

Whew!

Would like to know if there is another way.

183
Views
0
Helpful
2
Replies
CreatePlease to create content