Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

How to tell which server group ASA is using

Hi Everyone,

ASA is config for Radius Auth for Remote VPN clients.

Under server groups it shows 7 different AAA groups.

they have been assigned IP also.

How can i tell which AAA server group is used by the VPN client?

Regards

Mahesh

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: How to tell which server group ASA is using

Hi Mahesh,

You should probably check the "tunnel-group" configuration for the VPN Client connection which AAA you are interested in.

show run tunnel-group

or

show run tunnel-group

To my understanding you should see in the printed configuration the server group used for that VPN connection.

- Jouni

2 REPLIES
Super Bronze

Re: How to tell which server group ASA is using

Hi Mahesh,

You should probably check the "tunnel-group" configuration for the VPN Client connection which AAA you are interested in.

show run tunnel-group

or

show run tunnel-group

To my understanding you should see in the printed configuration the server group used for that VPN connection.

- Jouni

New Member

How to tell which server group ASA is using

Hi Jouni,

i run the command

sh run tunnel-group

it showed me the tunnel group name with command below

authentication-server-group nameof aaa server.

Regards

Mahesh

75
Views
0
Helpful
2
Replies
CreatePlease to create content