Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to write a static route between two Vlans

Here is what i need.

Servers at Vlan 6 must see servers at Vlan 2, 10, 11, 12. and and vica versa

How to write the correct commands.

Here is my outputs:

VLAN Name                                                Status    Ports

---- -------------------------------- --------- -------------------------------

1    default                                           active             Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4

2    ****OFFICE_SERVERS****              active    Fa1/0/13, Fa1/0/14, Fa1/0/15, Fa1/0/16, Fa1/0/17, Fa1/0/18, Fa1/0/19, Fa1/0/20, Fa1/0/25

                                                                  Fa1/0/26, Fa1/0/29, Fa1/0/30, Fa1/0/33, Fa1/0/34

4    ****END_USER****                          active    Fa1/0/39

6    ****ILO****                                          active    Fa1/0/1, Fa1/0/2, Fa1/0/3, Fa1/0/4, Fa1/0/5, Fa1/0/6, Fa1/0/7, Fa1/0/8, Fa1/0/9, Fa1/0/10

10   ****WEB****                                      active    Fa1/0/27, Fa1/0/28, Fa1/0/31, Fa1/0/32, Fa1/0/43

11   ****APP_SERVERS****                    active    Fa1/0/11, Fa1/0/12, Fa1/0/21, Fa1/0/22, Fa1/0/35, Fa1/0/36

12   ****DB_SERVERS****                    active    Fa1/0/23, Fa1/0/24, Fa1/0/37

99   ****VISITORS****                           active

Gateway of last resort is 192.168.0.253 to network 0.0.0.0

C    192.168.10.0/24 is directly connected, Vlan100

172.16.0.0/24 is subnetted, 6 subnets

C       172.16.29.0 is directly connected, Vlan99

C       172.16.30.0 is directly connected, Vlan6

C       172.16.9.0 is directly connected, Vlan3

C       172.16.10.0 is directly connected, Vlan4

C       172.16.0.0 is directly connected, Vlan1

C       172.16.1.0 is directly connected, Vlan2

C    192.168.0.0/24 is directly connected, Vlan5

S*   0.0.0.0/0 [1/0] via 192.168.0.253

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions

how to write a static route between two Vlans

Hello,

It appears to be switch configuration. If you create Vlan interface on this switch, as these are drectly connected subnets, they should able to communicate.

hth

MS

1 REPLY

how to write a static route between two Vlans

Hello,

It appears to be switch configuration. If you create Vlan interface on this switch, as these are drectly connected subnets, they should able to communicate.

hth

MS

795
Views
0
Helpful
1
Replies