Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

http access wont work

hello newbie question

i am trying to access the web interface of a asa and i put the following commands

and it asks for a username and password

which is not defined on the asa

http server enable

http 172.17.14.138 255.255.255.255 inside

what else do i need?

my telnet and enable pass dont work

3 REPLIES

Re: http access wont work

did you try https:\\FW_ip_address ? when prompted with user name leave blank and enter enable password.

for telnet add in asa:

telnet 172.17.14.138 255.255.255.255 inside

HTH

Jorge

New Member

Re: http access wont work

thanks that worked. what would be the command

to authenticate locally or to taacas

Re: http access wont work

Geroge, glad that worked..

to create user name locally use :

username Joe password xxxxx privilege 15

HTH

Jorge

Please rate post if resolved.

108
Views
0
Helpful
3
Replies