Try these steps to see if this works. Detect non-compliant HTTP traffic. Check if you want SDM to examine HTTP traffic for packets that do not comply with the HTTP protocol. Use the permit, block, and alarm controls to specify the action that the router takes when this type of traffic is encountered. Note that Blocking non-compliant HTTP traffic can cause the router to drop
traffic from popular websites that might not be blocked on the basis of content if those websites do not conform to the HTTP protocol.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...