Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HTTP Timeout on ASA 5510

I am trying to configure the HTTP(S) Timeout on our ASA 5510. Per MS Article 905013:

We recommend that you increase the firewall time-out values for HTTP(S)  requests to the Exchange Server Microsoft-Server-ActiveSync virtual  directory to provide a richer, "always-up-to-date" experience.  The  method that you use to increase the firewall time-out values depends on  which firewall product you use.  Refer to the firewall documentation for  information on about how to increase the firewall time-out values.

I saw the discussion here #1319238 that the option is under Global Timeouts, but I do not see an option for HTTP(s) listed. Is connection the same as HTTP(s), if not, how do I add that using the ASDM?

Cisco ASDM 6.2(1) for ASA 5510 8.2(1)

Thank you,

1 REPLY
Cisco Employee

Re: HTTP Timeout on ASA 5510

Here is a sample configuration on what you are trying to achieve:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080624e19.shtml

You just have to modify the access-list to match your requirement.

2806
Views
0
Helpful
1
Replies