Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

i can not access ASDM

I went  to a customer has ASA 5510  Version 8.0(4) but i couldn't access ASDM.

here is the configuration

any one can help

thank you

7 REPLIES

Re: i can not access ASDM

First check the flash if you have image of asdm:

show flash:

asdm-615.bin would be the image name may be 611 also depends.

as per the image in flash config boot (its not in your configs)

asdm image disk0:/asdm-XXX.bin

Update you java on machine which you would be accessing the ASDM just in case.

Neuromancer....

New Member

Re: i can not access ASDM

1.  the asdm image exist in the flash and \

2. I write this command into his asa

asdm image disk0:/asdm-615.bin

3. in the same day  I went  to another customer I could access asa throught asdm

so it is not java problem

New Member

Re: i can not access ASDM

What interface are your trying to hit? From what IP address??  It could be that you are missing the
http command to allow https access to the ASA.

Cheers!

- Yamil

Re: i can not access ASDM

Can you please provide the following:

sh flash

sh run asdm

Just to make sure things are fine.

Have you tested from a different host to access the ASDM or using the ASDM launcher?

Re: i can not access ASDM

Can you please provide the following:

sh flash

sh run asdm

Just to make sure things are fine.

Have you tested from a different host to access the ASDM or using the ASDM launcher?

Re: i can not access ASDM

Can you please provide the following:

sh flash

sh run asdm

Just to make sure things are fine.

Have you tested from a different host to access the ASDM or using the ASDM launcher?

Re: i can not access ASDM

Sorry, the message was sent several times by mistake.

638
Views
0
Helpful
7
Replies
CreatePlease to create content