Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

I cann't Static NAT with fedora 6

I cann't Static NAT with fedora 6

static (inside,outside) 212.229.41.3 192.168.0.30 netmask 255.255.255.255

static (inside,outside) 212.229.41.4 192.168.0.31 netmask 255.255.255.255

static (inside,outside) 212.229.41.5 192.168.0.10 netmask 255.255.255.255

static (inside,outside) 212.229.41.11 192.168.0.111 netmask 255.255.255.255

NAT With Windows

static (inside,outside) 212.229.41.3 192.168.0.30 netmask 255.255.255.255

static (inside,outside) 212.229.41.4 192.168.0.31 netmask 255.255.255.255

it's work but

static (inside,outside) 212.229.41.5 192.168.0.10 netmask 255.255.255.255

static (inside,outside) 212.229.41.11 192.168.0.111 netmask 255.255.255.255

NAT with linux it's not work,

Please advice to me

access-list

access-list inside_access_in extended permit ip any any

access-list outside_access_in extended permit ip any any log emergencies

1 REPLY
Bronze

Re: I cann't Static NAT with fedora 6

Refer to the ASA 7.x/PIX 6.x and Above: Open/Block the Ports Configuration Example document for more information

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080862017.shtml

123
Views
0
Helpful
1
Replies