Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

I just found an old PIX 501 that I'm thinking about repurposing

I just found an old PIX 501 that I'm thinking about repurposing. Would that box support one-to-one nat?

5 REPLIES
New Member

Re: RVS4000 advanced NAT configuration

Hi Blake,

I would suggest you pose your question in the following section.

https://supportforums.cisco.com/community/netpro/security/firewall

Thanks!

Dave

David L. Barrett, Jr.
Silver

Re: RVS4000 advanced NAT configuration

Hello,

This thread has been moved over to the firewall area.

Thanks,

Cindy Toy

Cisco Small Business Support

Community Manager

Regards, Cindy If my response answered your question, please mark the response as answered. Thank you!
Cisco Employee

Re: I just found an old PIX 501 that I'm thinking about repurpos

Hello Blake,

Mike here, well of course the Pix 501 supports a variaty of Natting (for not saying all of them). The commad that does it is the same as in the ASA, is the static command  Here is more information for you to check out

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/s.html#wp1026694

If you have any questions, let me know.

Mike

Mike
New Member

Re: I just found an old PIX 501 that I'm thinking about repurpos

Hi Blake,

Here is reference link for configuration for NAT/PAT on the pix:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800b6e1a.shtml

HTH,

Sai

New Member

Re: I just found an old PIX 501 that I'm thinking about repurpos

Hi Blake,

Here is reference link for configuration for NAT/PAT on the pix:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800b6e1a.shtml

HTH,

Sai

263
Views
0
Helpful
5
Replies