Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

I need to remotely manage an ASA 5505

I need to manage a Cisco ASA 5505 from a remote public IP.  It isn't necessarily connected through VPN.  Is this possible and if so what will the config look like.

Ex.

ASA would have a public address like 4.4.4.4 and a private IP of 192.168.1.1  The remote site would have a public IP like 2.2.2.2 and a private of 192.168.10.1

Any help is appreciated.

Thanks,


Ken

1 ACCEPTED SOLUTION

Accepted Solutions

I need to remotely manage an ASA 5505

Hello,

For sure this can be done via SSH or ASDM

ssh x.x.x.x 255.255.255.255 (Where x.x.x.x is the client public IP address) outside

http x.x.x.x x.x.x.x outside

You will need to have aaa authentication enabled for the specific protocol

Rate all of the helpful posts!!!

Regards,

Jcarvaja

Follow me on http://laguiadelnetworking.com

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
2 REPLIES

I need to remotely manage an ASA 5505

Hello,

For sure this can be done via SSH or ASDM

ssh x.x.x.x 255.255.255.255 (Where x.x.x.x is the client public IP address) outside

http x.x.x.x x.x.x.x outside

You will need to have aaa authentication enabled for the specific protocol

Rate all of the helpful posts!!!

Regards,

Jcarvaja

Follow me on http://laguiadelnetworking.com

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
New Member

I need to remotely manage an ASA 5505

Jcrvaja,

Thanks for your help.  That worked.

Ken

112
Views
0
Helpful
2
Replies
CreatePlease to create content