Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IAS on Win2k3 with ASA 5510

Hello people-

I have a 5510 with: 1 outside, 1 inside and a DMZ configured which has sec lvl of 50.

I have installed an IAS and I want to use it to authenticate when somebody connects to the firewall.

I am using SSH and I tried setting up the RADIUS but it seems I can t get it to work and teh debug does not disply any output.

Help!!!

!!! Sorry , the RADIUS sits in teh DMZ!

Thx

Vlad

1 ACCEPTED SOLUTION

Accepted Solutions

Re: IAS on Win2k3 with ASA 5510

Here's a link to help you out:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807349e7.shtml

HTH,

John

HTH, John *** Please rate all useful posts ***
3 REPLIES

Re: IAS on Win2k3 with ASA 5510

Here's a link to help you out:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807349e7.shtml

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: IAS on Win2k3 with ASA 5510

Thanks John,

I solved this , after realising that I was telling to the firewall the wrong interface on which the radius is.

Regards,

Vlad

Re: IAS on Win2k3 with ASA 5510

Glad to hear it! Thanks for the rating!

John

HTH, John *** Please rate all useful posts ***
117
Views
0
Helpful
3
Replies