Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ICMP Error

Hello,

Recently I have been getting the following error message;

Denied ICMP type=8, code=0 from 10.3.70.113 on interface inside

Any Idea's how to resolve this?

Thanks

Tahir

6 REPLIES
Cisco Employee

Re: ICMP Error

I assume that you are trying to ping the inside interface of the ASA firewall?

If that is the case,  you need to configure the following:

icmp permit any inside

OR/ if you need to be more specific you can configure the following:

icmp permit 10.3.70.113 255.255.255.255 inside

New Member

Re: ICMP Error

Hi Halijenn,

This is happening automatically, ICMP has been disabled. This error is generating quite frequently from various IP's

Tahir

Cisco Employee

Re: ICMP Error

The error is generated because as you advised icmp is disabled, hence you are getting the error on "deny" icmp echo.

New Member

Re: ICMP Error

This has just started to happen, ICMP has been disabled when we upgraded.

Will an access-list have triggered this off?

Tahir

Cisco Employee

Re: ICMP Error

The error is triggered because you disable icmp, if you enable icmp, you will not see that error.

The error says "deny" the icmp packet, because you have disabled icmp after upgrade as you said.

New Member

Re: ICMP Error

Ok thanks

542
Views
0
Helpful
6
Replies