I have a PPPOE dsl connection on my outside interface so my IP is dynamic. If I try to put something like:
access-list incoming permit tcp any host interface eq 25 I get a reply interface in not a parrameter. I understand that, but how will I get around this.
The SSH issue I have created a ca. Will I be able to access the PIX from my inside network where I am sitting now throught the PIX back onto the outside interface with SSH, or is there something I am missing, does it make sence.
As you noticed, you'll need to change both the access-list and static commands each time your outside IP address changes. The only way around this is to ask your ISP for a static IP address that won't change.
You can only access the PIX on the same interface that you are connected to. Therefore, if you are behind the inside of the PIX, you can only SSH to the inside interface. Likewise, from the outside you can only SSH to the outside interface.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...