Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Inside host to DMZ

I am unable to allow an inside host access to the DMZ. I have ip any any access lists set up on both interfaces and the following static "static (inside,dmz) [internal_ip_subnet][internal_ip_subnet] 255.255.255.0

2 REPLIES

Re: Inside host to DMZ

Can you post what you have? Normally to allow inside into the dmz, what you have would work, but without seeing your config it may be difficult to tell you what's going on.

HTH,

John

HTH, John *** Please rate all useful posts ***
Bronze

Re: Inside host to DMZ

It looks to be your static incorrectly configured

example static (inside,dmz)[dmz_IP_subnet][inside_IP_subnet] netmask 255.255.255.255

HTH

PRI

105
Views
0
Helpful
2
Replies
CreatePlease login to create content