Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Inside to DMZ

Hello,

On my ASA5510 I have 3 network.

Outside interface : 10.52.69.x/25

Inside interface : 172.16.1.x/24

DMZ interface: 172.16.0.x/252

Actually there no problem with the traffic from outside to DMZ and from outside to inside.

My problem is how to authorize the traffic from inside to DMZ?

Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Inside to DMZ

Do you have this static entry in your config?

static (inside,dmz) 172.16.1.0 172.16.1.0 netmask 255.255.255.0

3 REPLIES
Bronze

Re: Inside to DMZ

Do you have this static entry in your config?

static (inside,dmz) 172.16.1.0 172.16.1.0 netmask 255.255.255.0

Community Member

Re: Inside to DMZ

Thank you etienne, I forgot this entry.

Bronze

Re: Inside to DMZ

sure thing. thanks for the rating!!!

135
Views
0
Helpful
3
Replies
CreatePlease to create content