Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Interface question on ASA 5512-x

Is there a way to point two physical fiber connections on an ASA 5512-x to one (sub)interface? So that both fiber connections use the same gateway ip address configured on the ASA?

Thanks

1 REPLY

Interface question on ASA 5512-x

Hello David,

Each interface/sub-interface of an ASA firewall must remain on it's own dedicated Broadcast domain so this is not possible.

If you want to interfaces to sit in the same broadcast domain you could use the Firewall in transparent mode and confiure a BVI.

Looking for some Networking Assistance? 
Contact me directly at jcarvaja@laguiadelnetworking.com

I will fix your problem ASAP.

Cheers,

Julio Carvajal Segura
http://laguiadelnetworking.com

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
91
Views
0
Helpful
1
Replies
CreatePlease to create content