Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Internal website through a PIX 515e

I just need to be able to type in the IP address(i.e. http://1.1.1.1 ) and be able to access the apache web server that is running in order to make a mapping program available publicly and I can't, for the life of me, figure out what I'm doing wrong.

Here's my config

Never mind...I just figured it out. the config was correct but it can only be accessed from outside the network. To access it internally they have to use the local IP instead of the public one or it gives a page cannot be displayed error.

1 REPLY
Silver

Re: Internal website through a PIX 515e

the problem might be the doctoring DNS in the PIX conversion, check with the following link

PIX/ASA: Perform DNS Doctoring with the static Command and Three NAT Interfaces Configuration Example

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968c8.shtml

314
Views
0
Helpful
1
Replies