Internal website through a PIX 515e

[andy]

I just need to be able to type in the IP address(i.e. http://1.1.1.1 ) and be able to access the apache web server that is running in order to make a mapping program available publicly and I can't, for the life of me, figure out what I'm doing wrong.

Here's my config

Never mind...I just figured it out. the config was correct but it can only be accessed from outside the network. To access it internally they have to use the local IP instead of the public one or it gives a page cannot be displayed error.

[aghaznavi]

the problem might be the doctoring DNS in the PIX conversion, check with the following link

PIX/ASA: Perform DNS Doctoring with the static Command and Three NAT Interfaces Configuration Example

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968c8.shtml