Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

internet access from a pix using VPN

I am trying to create a semi-secure connection where a user can VPN into the pix 515, get an address 10.10.10.10 from the VPN pool, access devices on the private side, and also be able to access devices on the outside.

Do I do this via access-list on ACL_Outside_in or is there a command that will allow me to do this?

Thanks

DWane

4 REPLIES
Green

Re: internet access from a pix using VPN

Which pix version? 6, 7, 8?

Community Member

Re: internet access from a pix using VPN

We are using pix 7.2.2

Green

Re: internet access from a pix using VPN

same-security-traffic permit intra-interface

global (outside) 1 interface

nat (outside) 1 10.10.10.0 255.255.255.0

Also, make sure you are not split tunneling.

Community Member

Re: internet access from a pix using VPN

Thank you for your help. If we are using routable addresses and not private addressing, if there an issue with these statements. We are not using NAT at this time.

Thansk

Dwane

166
Views
0
Helpful
4
Replies
CreatePlease to create content