I am studying load balancing outbound Internet traffic through two ASA 5540's in active-active mode. Is this possible with just one subnet on the Inside? Even with two subnets, is real load-balancing (dividing packets or sessions based on individual unit's load) possible with an ASA?
Most former posts on this topic do not seem to have a clear answer.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...