Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IOS commands not availble

Hello ,

 

I have the following IOS on my routers:

(C7200-ADVIPSERVICESK9-M), Version 15.1(4)M2

(C2900-UNIVERSALK9-M), Version 15.1(4)M4

 

 

in class-map configuration, I can not find the command "match protocol attribute ......."  and many other commands. can anyone tell me why it is so ??

 

3 REPLIES
Cisco Employee

Hi, It seems to be a license

Hi,

 

It seems to be a license issue on your router ,please provide below output :-

#sh license

 

Prashant :-

 

 

New Member

please see it VPN_Server#sho

please see it

 

VPN_Server#sho license
Index 1 Feature: ipbasek9
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 2 Feature: securityk9
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 3 Feature: uck9
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 4 Feature: datak9
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 5 Feature: gatekeeper
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 6 Feature: SSL_VPN
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: 0/0  (In-use/Violation)
        License Priority: None
Index 7 Feature: ios-ips-update
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 8 Feature: SNASw
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 9 Feature: hseck9
Index 10 Feature: cme-srst
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: 0/0  (In-use/Violation)
        License Priority: None
Index 11 Feature: WAAS_Express
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 12 Feature: UCVideo
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
 

Cisco Employee

Hi,

Hi,

For these below platforms you already  have the required licenses seck9 and ipbasek9.

(C7200-ADVIPSERVICESK9-M), Version 15.1(4)M2

(C2900-UNIVERSALK9-M), Version 15.1(4)M4

Only for ISR4451-X/ASR series routers we need to have appxk9 license to enable layer 7 inspection, there is bug filed to track this  particular issue,  CSCuo75582 which is resolved in later releases.

kindly provide me the command which you are not able to apply example:-in this example I am not getting an option to apply L7 inspection.

Router(config)#class-map type inspect match-all class_FTP
Router(config-cmap)#match protocol ?
tcp                TCP
udp                UDP
icmp               ICMP

Prashant Joshi

93
Views
0
Helpful
3
Replies