12-21-2011 08:02 AM - edited 03-11-2019 03:04 PM
how to configure ip sla monitoring on asa ver 7.0 (6) ?
Solved! Go to Solution.
12-21-2011 08:47 AM
12-21-2011 09:19 AM
12-21-2011 09:23 AM
Hello,
In fact was introduced on 7.2.(1)
The information in this document is based on these software and hardware versions:
Cisco PIX Security Appliance 515E with software version 7.2(1) or later
Cisco Adaptive Security Device Manager 5.2(1) or later
You can also use this configuration with the Cisco ASA 5500 Series Security Appliance version 7.2(1).
Please rate helpful posts,
Julio
12-21-2011 08:47 AM
This might help.
Thanks
Ajay
12-21-2011 09:06 AM
thnx ,
but on asa i have this problem :
asa(config)#sla?
ERROR : % Unrecognized command
12-21-2011 09:19 AM
Looks like it was introduced with ASA 7.2 onwards.
Thanks
Ajay
12-21-2011 09:23 AM
Hello,
In fact was introduced on 7.2.(1)
The information in this document is based on these software and hardware versions:
Cisco PIX Security Appliance 515E with software version 7.2(1) or later
Cisco Adaptive Security Device Manager 5.2(1) or later
You can also use this configuration with the Cisco ASA 5500 Series Security Appliance version 7.2(1).
Please rate helpful posts,
Julio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide