I have a requirement to create IPSEC tunnel from my PIX to other vendor firewall. Please provide me with config details of PIX in detail related to this task
PIX to FIREWALL (OTHER VENDOR)
1. Please give me a detailed explaination how to create an IPSEC tunnel on PIX ? 2. What are the parameters need to match on the othervendor device to establish tunnel successfully? 3. How to enable access between private networks after establishing tunnel ?
Experts please provide a detailed explanation with configuration steps and Ip details,
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...