cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
327
Views
0
Helpful
3
Replies

IPSec Tunneling informations needed

gbordeleau
Level 1
Level 1

I have a Watchguard Firebox 3 in a remote site and a PIX 515e on my local site and want to have them communicate each other via a IPsec Tunnel and I don't really know how to perform that!

Does anyone can tell me the path ?

Thanks

3 Replies 3

JORGE RODRIGUEZ
Level 10
Level 10

Hi Guy, I could not comment on the Watchguard Firebox firewall on the how to stablish a vpn tunnel between two sites, however, you can take a look at some examples on how to configure site-to-site vpn between two pixes, read the principle on site-to-site vpn tunnel and you could get some support from the firebox vendor on how to create a site to site tunnel on their boxes.

Example of lan-to-lan vpn tunnel (CLI )

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml

Example of lan-to-lan vpn tunnel (PDM )

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008055bd85.shtml

Also, for the PIX515 side ensure you have

proper VPN-3DES-AES license as this is needed to enable site to site vpn tunnels.

HTH

Jorge

Jorge Rodriguez

Thanks Jorge,

I already have the proper VPN-3DES-AES license since I have installed a tunnel between our Europe Office and North America one. Thanks for the suggestion. I will have a look on Whatchguard side.

No problem,let us know how you make out on the watchguard fw side and pix tunnel.. check this forum as there is always a posibility someone out there may have done it and post comments on this thread..

Rgds

Jorge

Jorge Rodriguez
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: