I've currently got a remote access VPN configured on my ASA that is set give clients an IP address from the internal DHCP server on the inside interface of the ASA. The clients authenticate and get an IP but are unable to connect to any devices on the internal network, even with ping.
I'm running ASA5505 on v8.2(1). There are no other (layer 3) devices between the ASA and the DHCP server. The DHCP server is on the corporate LAN. There is a working VPN config (called RA-VPN) that works with using an IP Address Pool on the ASA. The RA-VPN-temp config is to use the DHCP server. The config is sanitised, but here it is:
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...