We have an ASA 8.4 with 2 internet connection, one primarily used for voice and the other for data. I have set up IPSLA so that if either link fails the traffic is routed over the other link. The problem is if voice fails, the routes change correctly but the phones do not come back up until I issue an 'clear xlate'
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...