Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Is my ASA 5505 dead ? (I2C_UNPOPULATED_ERROR, I2C_HOST_BUSY_ERROR)

Hello!

 

My ASA 5505 won't boot up correctly showing(after a long time (3-4 min):

i2c_read_word_w_wait() error, slot = 0x0, device = 0x64, address = 134 byte count = 2. Reason: I2C_UNPOPULATED_ERROR

 

I tried some solutions, like:

rommon #3> confreg 0x41

 

or trying to write a new image from a tftp server, but i could not get the Ethernets up.

 

Can some one please help me ?

Everyone's tags (1)
4 REPLIES

I'm going to erase disk0: and

   

Hello,Please try config

Hello,

Please try config regester 0x1 and reboot.

rommon #> confreg 0x1

 

If that does not work, you got a bad unit.

 

hth

MS

 

 

 

Thank you for your response,

Thank you for your response, it did not work. What do i have to do in this case? Which part of hardware do i have to replace?

I remember came across a

I remember came across a question related to exact issue and someone mentioned it as POE controller issue. Iam not quite sure on that. I would go with replacing complete ASA.

Thx

MS

316
Views
0
Helpful
4
Replies