Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

fly
New Member

is there any memory test method on ASA 5580-40

I test a ASA 5580-40, after reload I found there is only 10GB memory installed(before reload there is 12GB memory).

but there are 12 memory on board, I remove 2 memory each time to find which memory has problem.

just only A1/A2 i haven't remove  and didn't find problem

 

Now i add 2 memory , there are 14 memory on board, but when restart there are only 12G memory.

is there any memory test tool on ASA 5580-40:

Booting system, please wait...

 

 

 

10 GB Installed   <<<<<<<<<<<<<<<////actually we have 12 memory installed

                                                                              

ProLiant System BIOS - A07 (06/13/2007)

Copyright 1982, 2007 Hewlett-Packard Development Company, L.P.

2 REPLIES
fly
New Member

is 5580-40 chassis same as HP

is 5580-40 chassis same as HP DL580G5?

thank you!

Hall of Fame Super Silver

The diagnostic panel should

The diagnostic panel should indicate which memory module is faulty. There is a diagram further down on that linked page (figure 4-22) with the cross reference to the slot numbers.

33
Views
0
Helpful
2
Replies
CreatePlease login to create content