Issues copying start-up config to TFTP server over VPN. Why?
I have just replaced one of my ASA5505 firewalls with another for troubleshooting purposes. I copied the config from ASA-1(Old one) to ASA-2(New one). When I connect through the VPN I can not copy any .bin files or startup-config to a TFTP server over the VPN. I can it locally on the network without any issues. I was able to do this fine with the old ASA. Any ideas? The configs are the same.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...