07-27-2010 11:50 PM - edited 03-11-2019 11:17 AM
Hi Friends,
I have pair of CISCO ASA 5520 Firewall. I have set IST time as below but still i can see some lagging in time. Pls helpe me to fix it.
Config)# clock time-zone IST 5 30
# sh clock
12:06:44.827 IST Wed Jul 28 2010
I can 20 min delay in my firewall.
Thanks..
07-28-2010 01:09 AM
If you are wanting to set it manually, please issue the clock set command.
Otherwise, you can also set it to communicate to an NTP server to get time synched to NTP.
I hope this information helps you.
07-28-2010 05:16 AM
HI Edadios,
Thanks for your reply. Please advice me for below also
To use the NTP
ntp << Server IP>> is this enough or i need to give ntp authentication and ntp trust_key also..
In my switches i can see ntp
Thanks
07-28-2010 05:44 AM
Hi Tamilvanan,
If your NTP server does not require authentication, you can just specify the 'ntp server' command. Here is a link to the configuration guide for NTP for your reference:
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/basic.html#wp1067761
Hope that helps.
-Mike
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: