Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

L-2-L and remote access VPN

Dear ALL,

I've implemented a test configuration like cisco document ID 82020, but a single Lan-to-Lan and a remote VPN access. Lan-to-Lan behaviour is ok and remote access seems to be running within the first lan, but if I try to ping hosts on withind second lan I can't. Please, anyone could give me a troubleshooting tip?

Regards

Alberto

4 REPLIES
New Member

Re: L-2-L and remote access VPN

Did you check your NAT statements and for the command same-security-traffic permit INTRA-interface. Most errors occure in those two parts

cheers

michael

New Member

Re: L-2-L and remote access VPN

I'm having the same issue. Were you ever able to resolve this?

Gold

Re: L-2-L and remote access VPN

post your config.

make sure nat 0 is configured for all lans that remote access clients need access to. any acl's that might be blocking this traffic should also be checked. is 'sysopt connection permit-vpn' enabled?

New Member
374
Views
0
Helpful
4
Replies
CreatePlease to create content