Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

L2L VPN with overlap IP Addressing!!!

Hi,

We would like to set up VPN tunnel with another location, but they both have same ip addressing.

For instance:

Location A: 10.1.0.0/16 (ASA firewall)

Location B: 10.1.0.0/16 (ASA firewall)

Is there any Cisco documentation I can follow??

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: L2L VPN with overlap IP Addressing!!!

Hi,

You need to do Policy NAT for the VPN traffic (NAT on both sides of the tunnel so traffic won't overlap).

You can try following the configuration from the first ASA on this link:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml

The idea is to NAT the interesting traffic on both ends, and define the VPN traffic as the NATed traffic.

Hope to help.

Federico.

1 REPLY

Re: L2L VPN with overlap IP Addressing!!!

Hi,

You need to do Policy NAT for the VPN traffic (NAT on both sides of the tunnel so traffic won't overlap).

You can try following the configuration from the first ASA on this link:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml

The idea is to NAT the interesting traffic on both ends, and define the VPN traffic as the NATed traffic.

Hope to help.

Federico.

196
Views
0
Helpful
1
Replies