Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

l2tp from xp through pix to 2k3

Does the pix 515e 6.2 support l2tp certificate authentication through itself to a 2k3 server using the Windows XP native vpn client? I can get it to work with a Windows 2000 native client. For some reason XP does not work, although it works on the intranet, not going through the firewall. Something in the PIX is stopping the XP client. Like I said, I seem to have all the right ports open as I can get it to work with a Windows 2000 machine. I read somewhere that XP and l2tp with NAT does not work without modifying the registry? I dont want to authenticate TO the pix, I just want to go through it.

2 REPLIES
Silver

Re: l2tp from xp through pix to 2k3

PIX 515e 6.2 support L2TP .

Use this Cisco PIX 500 Series Security Appliances Configure guide.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/tsd_products_support_configure.html

Community Member

Re: l2tp from xp through pix to 2k3

Thanks for the link, but I couldnt find an example using L2TP with certificates from XP client. I saw similar config examples, like using IOS version 8.0, 12.0, or Windows 2000.

Anyone with ideas? I can accomplish a PPTP, but this is less secure. Thanks again,

130
Views
0
Helpful
2
Replies
CreatePlease to create content