11-22-2006 03:27 AM - edited 03-11-2019 01:59 AM
I am trying to establish 2 sesions L2TP/ipsec VPN connections through Pix 501.
Everything works fine when one computer make connection to VPN Server, but when this sesion is established, and another computer tries to make connection, second sesion canot be established.
Configuration:
Pix 501 6.3(5) have 2 interfaces
outside:10.3.x.x
inside:192.168.x.x
VPN server is in outside network 10.3.x.x
VPN clients are in inside network 192.168.x.x
inside network is behind PAT to outside single ip address.
11-22-2006 12:09 PM
hi.
just go thru the following link...
http://www.cisco.com/warp/public/110/l2tp-w2kxp-pix72-pre.pdf
-Pls rate if useful--
11-23-2006 01:16 AM
Thank you for replay. But you misunderstood my point.
As I wrote above, Pix Firewall isn't VPN Server for Windows XP VPN Clients.
VPN Server is Windows 2K Server. Problem is that Pix Firewall 501 let only one L2TP Session through.
Network Topology diagram:
11-24-2006 08:08 AM
I am afraid this is not possible:
Multiple PPTP Connections Fail when using PAT
You can only have one PPTP connection through the PIX Security Appliance when you use PAT. This is because the necessary GRE connection is established over port 0 and the PIX Security Appliance only maps port 0 to one host.
See this link also
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: