I have configure a L2TP VPN with dynamic map. My users connect perfect, but I would like to tunneled only traffic to my network, and let web and mail traffic use their internet connection. I did use "split-tunnel-network-list" but it did not work. Meanwhile, using this with VPN IPsec with Cisco client, works perfect. Any ideas? Thanks.
The reason I think your split tunnel is not working is because you have not configured the access list used for split tunnel properly. Also make sure you have configured split tunneling with command "vpngroup group_name split-tunnel access_list".
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...