I have a need to configure ezvpn remote on an asa to our office, but they also need to have a lan-to-lan tunnel to another office. Is this possible? I can't apply ezvpn if I have any isakmp policies, tunnel-groups etc, enabled on the asa.
ASA cannot act as L2L vpn peer and ezvpn client at the sametime. It can be ezvpn server (to accept ezvpn clients) and L2L vpn peer at the same time. [I tried this before (when we first started deploying ezvpn solution for few of our clients)].
Here is info from cisco doc:
"When used as an Easy VPN hardware client, the ASA 5505 can also be configured to perform basic firewall services, such as protecting devices in a DMZ from from unauthorized access. However, if the ASA 5505 is configured to function as an Easy VPN hardware client, it cannot establish other types of tunnels. For example, the ASA 5505 cannot function simultaneously as an Easy VPN hardware client and as one end of a standard peer-to-peer VPN deployment".
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...