cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
664
Views
0
Helpful
2
Replies

Launch ASDM on outside interface

haidangbkit
Level 1
Level 1

Dear all values Cisco,

My ASA5520 firewall has inside ip: 172.16.16.1, and outside ip: 192.168.182.1.

I'm in outside network, have ip:10.1.27.0/24, connect to outside interface of firewall.

Servers are in inside network, have ip: 192.168.176.0/24, connect to inside interface of firewall.

Diagram: Servers (192.168.176.0/24) =>Switch=> (inside ip: 172.16.16.1)Firewall(outside ip: 192.168.182.1)=>Switch=>Ouside network (10.1.27.0/24)

Now I can launch ASDM on inside interface (because we have a direct connection to inside switch). And now, I want to launch on outside interface.

Can you help me to config?

Thanks so much,

Dang Nguyen,

Viettel Cambodia Company.

1 Accepted Solution

Accepted Solutions

Jennifer Halim
Cisco Employee
Cisco Employee

All you need to configure is the following:

http 10.1.27.0 255.255.255.0 outside

Hope that helps.

View solution in original post

2 Replies 2

Jennifer Halim
Cisco Employee
Cisco Employee

All you need to configure is the following:

http 10.1.27.0 255.255.255.0 outside

Hope that helps.

It works.

Thank you so much.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card