Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Launch ASDM on outside interface

Dear all values Cisco,

My ASA5520 firewall has inside ip: 172.16.16.1, and outside ip: 192.168.182.1.

I'm in outside network, have ip:10.1.27.0/24, connect to outside interface of firewall.

Servers are in inside network, have ip: 192.168.176.0/24, connect to inside interface of firewall.

Diagram: Servers (192.168.176.0/24) =>Switch=> (inside ip: 172.16.16.1)Firewall(outside ip: 192.168.182.1)=>Switch=>Ouside network (10.1.27.0/24)

Now I can launch ASDM on inside interface (because we have a direct connection to inside switch). And now, I want to launch on outside interface.

Can you help me to config?

Thanks so much,

Dang Nguyen,

Viettel Cambodia Company.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Launch ASDM on outside interface

All you need to configure is the following:

http 10.1.27.0 255.255.255.0 outside

Hope that helps.

2 REPLIES
Cisco Employee

Re: Launch ASDM on outside interface

All you need to configure is the following:

http 10.1.27.0 255.255.255.0 outside

Hope that helps.

Community Member

Re: Launch ASDM on outside interface

It works.

Thank you so much.

510
Views
0
Helpful
2
Replies
CreatePlease to create content