Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Layer 7 HTTP Policy Map

Hi Everyone,

I have this Layer 7 Policy Map which i config using ASDM  under inspects

policy-map type inspect http test4

        parameters

          protocol-violation action drop-connection log

        class _default_GoToMyPC-tunnel

          drop-connection log

class maps identify the traffic and policy maps tell us what action to take.

Need to know on above config class map which matches the trafic is

class _default_GoToMyPC-tunnel

Regards

Mahesh

Message was edited by: mahesh parmar

1 ACCEPTED SOLUTION

Accepted Solutions

Layer 7 HTTP Policy Map

Hello Mahesh,

It's basically null,

You are not maching anything. so nothing will get dropped

Check my blog at http:laguiadelnetworking.com for further information.

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
9 REPLIES

Layer 7 HTTP Policy Map

Hello,

Not sure what you ask..

Do u want to know what the class-map matches or includes?

Do show run class-map _default_GoToMyPC-tunnel

For Networking Posts check my blog at http://www.laguiadelnetworking.com/category/english/

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
New Member

Layer 7 HTTP Policy Map

Hi Julio,

Here i need to confirm  what class map matches?

Regards

MAhesh

New Member

Layer 7 HTTP Policy Map

Hi Julio,

When i do 

ASA1# sh run class-map _default_GoToMyPC-tunnel

!

!

ASA1#

Can you tell why the class-map output is empty?

Thanks

Mahesh

Layer 7 HTTP Policy Map

Hello,

Well it does not look like you add it a match  statement,

Did you?

Can you share show run class-map type inspect _default_GoToMyPC-tunnel

For Networking Posts check my blog at http://www.laguiadelnetworking.com/category/english/

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
New Member

Layer 7 HTTP Policy Map

Hi julio,

I tried below commands but seems it does not work

ASA1# show run class-map type inspect _default_GoToMyPC-tunnel

                                      ^

ERROR: % Invalid input detected at '^' marker.

ASA1# show run class-map type inspect ?

  dns       Configure a class-map of type DNS

  ftp       Configure a class-map of type FTP

  h323      Configure a class-map of type H323

  http      Configure a class-map of type HTTP

  im        Configure a class-map of type IM

  rtsp      Configure a class-map of type RTSP

  scansafe  Configure a class-map of type SCANSAFE

  sip       Configure a class-map of type SIP

ASA1# show run class-map type inspect  default_GoToMyPC-tunnel

                                        ^

ERROR: % Invalid input detected at '^' marker.

ASA1# show run class-map type inspect_default_GoToMyPC-tunnel

                                     ^

ERROR: % Invalid input detected at '^' marker.

ASA1#

Thanks

Mahesh

Layer 7 HTTP Policy Map

Hello,

I missed the HTTP

show run class-map type inspect http  _default_GoToMyPC-tunnel

Check my blog at http:laguiadelnetworking.com for further information.

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
New Member

Layer 7 HTTP Policy Map

Hi Julio,

Its here

ASA1#  show run class-map type inspect http  _default_GoToMyPC-tunnel

!

!

ASA1#

Layer 7 HTTP Policy Map

Hello Mahesh,

It's basically null,

You are not maching anything. so nothing will get dropped

Check my blog at http:laguiadelnetworking.com for further information.

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
New Member

Layer 7 HTTP Policy Map

Thanks Julio,

Regards

Mahesh

269
Views
0
Helpful
9
Replies
CreatePlease to create content