Limit speed on port or VLAN? - ASA 5505

[Layer_Two]

Hi,

We need to have one connection with less internet bandwidth assigned to it than all other other connections. Basically it is a separate conection from all others, incomming just from one switch port and separate VLAN

I know this can be done on the switch by limiting the bandwidth allocated to a port,

Switch(config)# interface gigabitethernet2/0/1

Switch(config-if)# srr-queue bandwidth limit 80

however, is it possible to have the speed limited down, just before it goes to the internet, ie, on the ASA, rather than doing it on the switch?

The firewall is an ASA 5505

Thank you in advance

[Maykol Rojas]

Hello,

You can use Policing QoS.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

Version is a bit old, but it still applies.

Mike

[Layer_Two]

Thank you!