Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Load Balancing

If I use two ISP Links and configure both links on ASA then is it possible that load balancing to be configure??

1 REPLY
Bronze

Re: Load Balancing

It isn't supported, because the 2 ISP with 2 different IP address isn't supported. If you want to create load balancing between two ASA, the requirements for it:

- The ASAs inside and outside interface must be in same subnet.

- the Isakmp must be enable on both interface, because the ASAs communicating each other with isakmp keepalive traffic.

But, you can't do it with two different ISP, which have 2 completely different IP address.

170
Views
0
Helpful
1
Replies
CreatePlease to create content