Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)

logging connection timeouts

I'm investigating an issue with an application that uses "connection pooling". Basically it creates a number of connections at start-up and and then uses them as required. What I think is happening is that as the connections are idle until used, they are being timed out. Is there any way of logging when a connection is timed out, to confirm this.

I know I could just increase the timeout, but want to prove my theory before I investigate this option.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: logging connection timeouts

302014

Error Message %PIX|ASA-6-302014: Teardown TCP connection id for

interface:real-address/real-port to interface:real-address/real-port duration hh:mm:ss bytes

bytes [reason] [(user)]

<<<<< Reason = Conn-timeout

should have one for UDP as well but I did not find it.

1 REPLY

Re: logging connection timeouts

302014

Error Message %PIX|ASA-6-302014: Teardown TCP connection id for

interface:real-address/real-port to interface:real-address/real-port duration hh:mm:ss bytes

bytes [reason] [(user)]

<<<<< Reason = Conn-timeout

should have one for UDP as well but I did not find it.

260
Views
0
Helpful
1
Replies
CreatePlease to create content