10-04-2010 05:53 AM - edited 03-11-2019 11:49 AM
Hello Dears,
I can't see any logs on FWSM when i do sh logging. Below is the output and command what i have entered in the configuration.
logging enable
logging buffer-size 8096
logging asdm-buffer-size 512
logging trap debugging
logging asdm debugging
logging queue 8192
logging host MGMT 172.24.10.10
logging host MGMT 172.24.10.11
FWSM(config)# sh logging
Syslog logging: enabled
Facility: 20
Timestamp logging: disabled
Standby logging: disabled
Deny Conn when Queue Full: disabled
Console logging: disabled
Monitor logging: disabled
Buffer logging: disabled
Trap logging: level debugging, facility 20, 227608597 messages logged
Logging to MGMT 172.24.10.10 errors: 143 dropped: 32864
Logging to MGMT 172.24.10.11 errors: 277934 dropped: 41712784
History logging: disabled
Device ID: disabled
Mail logging: disabled
ASDM logging: level debugging, 227608597 messages logged
Thanks
Solved! Go to Solution.
10-04-2010 06:41 AM
Hi,
I am not sure i am the right person to answer this as i do not have lot of experience with designing or working with networks. I am sure there are other better people out there who can help you with some tools, etc to help you with your requirement.
I can try my best to suggest workarounds as situations arice and provide ways of securing your network.
Cheers,
Prapanch
10-04-2010 05:59 AM
Hi,
Please add the command "logging buffered debugging" and then you should see logs in the "show logg" output.
As a side note, I owuld suggest you not to have these many syslog destinations enabled on the FWSM as there is a high chance of overloading it and resulting in issues. Please disable ones you think can be done away with.
Thanks and Regards,
Prapanch
10-04-2010 06:18 AM
Thanks Prapanch,
I will do it tomorrow as i m out of office i will update u. Prapanch how i can check the health of My Network.??? If u can help me with your expierience.
Thanks,
10-04-2010 06:41 AM
Hi,
I am not sure i am the right person to answer this as i do not have lot of experience with designing or working with networks. I am sure there are other better people out there who can help you with some tools, etc to help you with your requirement.
I can try my best to suggest workarounds as situations arice and provide ways of securing your network.
Cheers,
Prapanch
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: