Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Map and forwarding problem

Hi,

I've created a static NAT:

static (inside,outside) 200.200.200.10 172.16.0.10 netmask 255.255.255.255

It's working fine.

But, now I want to forward all traffic to destination 200.200.200.10 port 8888 for 172.16.0.20 port 80... and I'm putting the command:

static (inside,outside) tcp 200.200.200.10 8888 172.10.31.20 80 netmask 255.255.255.255, and the ASA is showing me the following error:

ERROR: mapped-address conflict with existing static

inside:172.16.0.10 to outside:200.200.200.10

What should be the better way to resolve this problem?

Thanks

Tauer

2 REPLIES
Silver

Re: Map and forwarding problem

200.200.200.10 ip address is completely being used 172.16.0.10 .so its dedicated and we cannot use it.

you can use it in Dynamic NAT

nat(inside) 2 0.0.0.0

global (outside) 2 200.200.200.10

and then use

static (inside,outside) tcp 200.200.200.10 8888 172.10.31.20 80 netmask 255.255.255.255

New Member

Re: Map and forwarding problem

Sorry,

I tell you the wrong IP.

Instead 172.10.31.20, you consider 172.16.0.20

Anyway,

should I replace the line you wrote:

nat(inside) 2 0.0.0.0 to

nat(inside) 2 172.16.0.20

??

Thanks

Tauer

111
Views
0
Helpful
2
Replies
CreatePlease to create content