Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

matching ACLs based on ToS bits

We are looking to match ACLs based on ToS bits using the ASA 5500 series. Can anyone provide feedback or describe a succesful implementation?

1 REPLY

Re: matching ACLs based on ToS bits

ok lets say u have Extended ACL

access-list 100 permit ip 192.1681.0 255.255.255.0 any

then u need to match any traffic from that subnet going to any distination with TOS DSCP ef

do the following

hostname(config)#class-map match-all voice

hostname(config-cmap)#match access-list 100

hostname(config-cmap)#match dscp ef

then u can apply it to whatever interface or globaly (to all interfaces)

the following link contain good details regrading ur question

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

good luck

please, if helpful rate

98
Views
5
Helpful
1
Replies