Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Migrating from ASA5505 to ASA5510 Transparent Mode

I have been trying to migrate an ASA5505 consecration to a 5510 and cannot get the ports configured and switchport is not recognized? Can anyone help Below is my basic config

Firewall transparent

int vlan1

nameif inside

no shut

int vlan 2

nameif outside

no shut

int vlan 3

no shut

int e0/0

switchport access vlan 1

no shut

int e0/1

switchport access vlan 2

no shut

int e0/2

switchport access vlan 2

no shut

int e0/3

switchport access vlan 2

no shut

ip address 192.168.123.123

hostname System_1

enable password System_admin

passwd System_admin

username admin password Systemadmin privilege 15

aaa authentication ssh console LOCAL

http server enable

.

.

.

.

218
Views
0
Helpful
0
Replies